Who Makes A Chrome or Billet Double Deep Groove Alt Pulley? him, direction, searching, Chrome

amy

I tried doing a little searching but I suck at this computer.
Can anyone point me in the right direction?

I got mine from  Poston they are March pullies

Joe I'm sure it's Robsbuick you are looking for but I've been wrong before.
Jamie


Originally Posted by staged70I got mine from  Poston they are March pullies

Ok I'll check it out.Originally Posted by K0K0Joe I'm sure it's Robsbuick you are looking for but I've been wrong before.
Jamie

I sent him a pm. Waiting for a response thanks.

If it is coming off a stock pulley at 6K then I would take a close look it the allignment. Most likely it is off. Pull a string and shim it. It will stay put. Also get the belt with the cogged surface. This seems to help.

Jim I had this problem on my car until I installe dthe deep pully. When I would rev the engine you could see the belt climb up. never had a problem after the switch.

Got mine from Poston too. They are made by March.


Originally Posted by flynbuickIf it is coming off a stock pulley at 6K then I would take a close look it the allignment. Most likely it is off. Pull a string and shim it. It will stay put. Also get the belt with the cogged surface. This seems to help.

Thanks Jim, I did get a shim for my water pump pulley. I will try it.

Originally Posted by staged70Jim I had this problem on my car until I installe dthe deep pully. When I would rev the engine you could see the belt climb up. never had a problem after the switch.

I'm hoping this fixes it. When I spin it up, the power steering belt is too close to the backside of the wp pulley. I ran it without the prw steering belt to see if this was a problem but it still spit the alt belt so I need to re-align.

Originally Posted by kick71Got mine from Poston too. They are made by March.

Poston does not stock much these days. I have march too.